Cutting fluid, hydraulic oils, grease, spill control and measuring tools supplied through Carter. Compare pack sizes and stated accuracy before you enquire.
Prices are per supply unit shown, excluding VAT and delivery. Product identification, availability and any applicable technical documents are confirmed with your quotation.
For lubricating/cooling blades and workpieces when cutting mild steel.
5 L container
£70.36 + VAT
£84.43 including VAT
Delivery quoted separately.
Check saw coolant requirements, metal compatibility, dilution and SDS before use.
Availability confirmed with quotation
ISO VG32 hydraulic oil. Confirm the complete performance specification for your machine.
5 L container
£23.91 + VAT
£28.69 including VAT
Delivery quoted separately.
Match the oil grade and chemistry to the machine manual and existing lubricant.
Availability confirmed with quotation
ISO VG46; listed performance specifications DIN 51524 part 2 HLP and ISO 6743/4 HM.
5 L container
£36.80 + VAT
£44.16 including VAT
Delivery quoted separately.
Match the oil grade and chemistry to the machine manual and existing lubricant.
Availability confirmed with quotation
NLGI 2, lithium soap thickener, mineral base oil; traditional cartridge.
1 × 400 g cartridge
£3.45 + VAT
£4.14 including VAT
Delivery quoted separately.
Check compatibility with existing grease. Not compatible with screw-in cartridge guns.
Availability confirmed with quotation
Accepts standard 400 g cartridge; bulk/suction filling; rated up to 6000 psi / 413 bar.
One gun, 150 mm rigid extension and four-jaw coupler
£23.68 + VAT
£28.42 including VAT
Delivery quoted separately.
Match cartridge format and grease nipple; use pressure suitable for the equipment.
Availability confirmed with quotation
Resolution 0.01 mm; accuracy ±0.03 mm; hardened stainless steel; metric/imperial; CR2032 included.
One 0–150 mm / 0–6 inch caliper
£30.37 + VAT
£36.44 including VAT
Delivery quoted separately.
Accuracy ±0.03 mm is distinct from the 0.01 mm display resolution. Ask if calibration certification is required.
Currently unavailable · enquire for restock
0–300 mm / 0–12 inch; resolution 0.01 mm; accuracy ±0.04 mm; not waterproof.
One caliper, case, CR2032 battery and manual
£66.65 + VAT
£79.98 including VAT
Delivery quoted separately.
Accuracy ±0.04 mm is distinct from the 0.01 mm display resolution. Keep the instrument dry; ask if calibration certification is required.
Availability confirmed with quotation
Range ±180°; resolution 0.1°; stated accuracy/repeatability ±0.1°; magnetic V-groove base.
One gauge with battery and instructions
£25.88 + VAT
£31.06 including VAT
Delivery quoted separately.
Magnetic base suits flat and curved references. Zero on the reference surface before comparing an angle.
Availability confirmed with quotation
Rated pack absorption 100 L; heavyweight dimpled oil-only pads.
100 pads, each 50 × 40 cm
£65.55 + VAT
£78.66 including VAT
Delivery quoted separately.
For oil spills. Choose a different absorbent for water-based coolant or chemicals; disposal depends on the liquid absorbed.
Availability confirmed with quotation
Natural clay granules for non-aggressive spills; bag volume is not absorption capacity.
One 20 L bag
£16.39 + VAT
£19.67 including VAT
Delivery quoted separately.
Select for a compatible spill and follow the product instructions for use and disposal.
Availability confirmed with quotation
Class I; stated full-length tolerance ±0.6 mm; metric double-sided blade.
One 5 m tape, 25 mm blade
£5.01 + VAT
£6.01 including VAT
Delivery quoted separately.
Keep the end hook in good condition and support the tape correctly for accurate measurement.
Availability confirmed with quotation
EC Class I accuracy; 8 m metric-only tape.
One 8 m tape
£26.21 + VAT
£31.45 including VAT
Delivery quoted separately.
Keep the end hook in good condition and support the tape correctly. Ask if calibration certification is required.
Availability confirmed with quotation
Stated accuracy 0.5 mm/m in the normal position; non-magnetic; two vertical vials and one horizontal vial.
One 600 mm level
£23.95 + VAT
£28.74 including VAT
Delivery quoted separately.
The quoted accuracy applies to the normal position. Ask for a level with a specified inverted accuracy if needed.
Availability confirmed with quotation
No matching products. Try another search or ask Carter about an unlisted item.
ISO VG32 and VG46 are separate viscosity grades. Match the complete oil or grease specification to your machine manual and existing lubricant. Cutting fluid dilution and material compatibility follow the product data sheet.
Class I tapes, stated caliper accuracy and level accuracy help you select the right tool. Display resolution is not the same as accuracy. Ask if your work requires a calibration certificate.
Oil-only pads suit oil spills; choose an appropriate absorbent for coolant or chemicals. Bag volume does not equal absorption capacity. Disposal depends on the liquid absorbed.
