Carter Machinery

PRESS BRAKE SETUP · METRIC

Choose the opening.
See the trade-offs.

Compare V-openings for your part, then find matching Euram dies. A wider opening reduces force and increases the natural bend radius and required flange support.

1. Your bend

Material strengths are starting estimates. Enter the value for your actual grade when known.

Use the developed blank distance, matching the bend planner. This is different from a finished outside flange dimension.

Starting range—

Normal air-bending guide: 6–12 × thickness. The highlighted starting choice is nearest 8 × thickness; it is not a confirmed setup.

Need a flat length first? Open the flat calculator →

COMPARE BEFORE YOU SELECT

2. V-opening comparison

Only recorded die variants with a smaller included angle and enough solid-tool rated capacity appear. Punch capacity, mounting and machine capacity must also be checked.

Loading the Euram tool catalogue…
V-openingInside radius
estimate
Min. support
bend centre to edge
Load
tons/m
Total force
tons
Compare tools

LINKED TO OUR CATALOGUE

3. Matching dies

How the estimates work and what to check

This is a normal air-bending selection aid. It does not assess hemming, coining, bottoming, large-radius wrapping or special tooling.

Force uses the same estimate as our bend planner: 55 × thickness² ÷ V × (tensile strength ÷ 450) tons per metre. Total force also includes bend length. Check the actual punch, die, holder, clamp and press capacity; solid-tool ratings do not establish the capacity of segmented tools.

Natural inside radius uses V × 0.16 for mild steel, V × 0.21 for stainless and V × 0.14 for aluminium. These are approximate material factors, not guaranteed radii. Actual grade, grain direction, punch radius and process affect the result.

Minimum support is a conservative sharp-hinge estimate: V ÷ [2 × cos((180° − inside angle) ÷ 2)] + thickness. It is measured from the bend centre along the developed blank and includes a thickness allowance. Confirm support against the actual die shoulders, bend radius and supplier instructions.

Tool dimensions and solid-tool ratings are recorded from the applicable technical data. Some profiles use conservative body envelopes. Listings without a matched drawing or load rating are available in the sales catalogue but are excluded from this comparison.

Continue in the planner to inspect the part and bend order. Verify the physical setup and a test bend before production.